Large roller shutters and roller shutters

The company's products will not be blocked by snow and will withstand a significant wind load. The compactness of the structures to preserve the working space as much as possible, Insulated options will create additional thermal insulation. The advanced technologies and high-quality materials used by us in the manufacture will ensure resistance to corrosion, temperature changes - frost, scorching sun. Such equipment can be effectively used for a long time.

Roll gate what is it?

This is generally referred to as various types of roller gates. Their design resembles roller shutters, however, and sectional doors at the same time, while combining their best qualities.

Products are made of steel or reinforced aluminum profile. Similarly with sectional doors, they are mounted on openings of any type of width/height specified below. They become an ideal solution in cases when a minimum area is allocated for opening /closing the gate - the installation of other gate options is often technically impossible.

Sizes Roll gate

In garages, we mount lifting roller shutters for the opening width of 1500...4000 mm at a height of up to 2700...3000 mm. It is possible to manufacture narrower versions of products. At the same time, we use a cold-rolled steel profile with a width of 80 mm. 

We create industrial roller shutters on the basis of an aluminum profile, which is light, does not corrode, durable, reliable. With a wall thickness of 1...2 mm, we create structures up to 12,000 mm wide with one canvas, and when using sliding trusses, we install our products on significant openings whose width reaches 40,000 mm.

We create industrial roll gates from an aluminum profile with a warming layer, more often we install them in openings over 5,000 mm. Such structures are suitable for installation in warehouses, hangars, as well as garages and other premises. It is also possible to install them in openings of 10,000...20,000 mm or more in height/width (serve as an analogue of Hormann Decotherm, HR 116). Such structures carry significant loads.

What distinguishes industrial gates?

Among the distinctive features , the main ones are:

1. Sizes. The size of the structures should allow special equipment to pass freely: fire trucks, trucks, etc.

2. Intensity of operation. The conditions of use, unlike products for private use, are more stringent - industrial gates are designed for active, repeated operation during the day (up to 100 cycles per day) - they are opened/ closed more often. This means that they should be made more wear-resistant.

Automatic Industrial gates — application

Such constructions are widely in demand at various production facilities, are used for the arrangement of commercial enterprises. Among them:

• granaries, vegetable depots;
• workshops of factories, factories;
• entrances of mining and processing complexes of various profiles;
• storage facilities;
• workshops, hangars;
• entertainment, shopping centers;
• supermarkets.

They are used for automobile entrances for passenger cars, trucks – car washes, service stations, ATPs, parking lots, etc. They can be equipped with any openings of the premises, dividing them with roller shutters among themselves.

Varieties of roller gates

Our company produces various types of large roller shutters and roller shutters, adapting them to the needs of users as much as possible. Therefore, for each special situation, we will offer you an effective solution. We create the following samples of roller gates:

• Industrial aluminum AL-120. We produce from an aluminum profile with a layer of insulation. Such structures are used for installation in openings with a size of over 5000 mm. They can be installed in openings of 10,000...20,000 mm or more in height/ width (the analog is the Hörmann Decother, as well as HR 116). Structures are subjected to significant loads. In production we use: high-strength profile AL-120; lamellae 1...2.5 mm thick; insulation layer over 20 mm wide.

• Steel M-80 and M-80R. We make it from the steel profile "M-80", we also create it from the perforated profile "M-80R". During production we use modern European automated equipment. Painting is carried out in a 12-meter chamber in the colors of the RAL catalog. Our company will produce large steel roller shutters, roller shutters for openings in the ratio of height / width, respectively, up to 7 000/9 000 mm.
  

• Translucent. For the manufacture of RP-19, we choose monolithic polycarbonate. The created devices are distinguished by significant aesthetics. Note that in terms of strength characteristics, they are not inferior to steel, aluminum analogues. The translucency of the lamellae is up to 90%. We create stiffeners, combine lamellas, providing a high degree of safety with durable aluminum profiles. A special type of addition - the superposition of elements on each other prevents the friction of materials, their abrasion.
  

• Rolled gate mesh. Popular designs today in car parking lots, various driveways, shopping pavilions, storefronts, zoos, industries, etc.

Management options

They are selected based on the wishes of the customer, taking into account the technical need to ensure the high-quality functioning of a complex metal structure. Modern automatic drives used in the production of products by our company make the daily use of roller shutters the simplest and most comfortable. They make it possible to control them by pressing the remote control button. Radio control units allow you to adjust the speed of movement of the canvas, install auto-closing, embed security elements, etc.

Order large roller shutters and roller shutters at the best price from the MBA production company. Make a phone call, send an application by e-mail, order a payment and a callback.