Certificates

The certificate according to the technical regulation 043/2017 No. EAEU BY/112 02.01.TR043 140.01 00142 of the year indicates that the products of LLC Fire Protection Systems - fire-fighting gates (curtains), trademark "FireTechnics" type FireTechnics-EI180, in a roll-up or lifting folding ("accordion") design, with a cloth made of non-flammable materials, with or without a trapdoor, using water irrigation from the side opposite to the fire (water consumption of at least 0.08 liters/m2 of gate leaf per second), produced according to TU 25.11.23-003-16123348-2022 "Fire-fighting gates, smoke- and gas-proof roller blinds"FireTechnics". Technical specifications", technical description FS-RU10001 "Fire-fighting gates (curtains) of the FireTechnics trademark of the FireTechnics-EI180 type, in a roll-up or folding ("accordion") design, with a cloth made of non-combustible materials, with or without a loophole door, with unilateral use of water irrigation from existing sprinkler or drainage systems building fire extinguishing systems (water consumption of at least 0.08 l/m2 per second). Fire resistance limit EI180". Overall dimensions, mm width×height): roll–up min. – 800×250, max. - 50000×30000; lifting folding min. – 1500×500, max. – 500000×15000. The nominal height of the loophole door is 2100 mm. Fire resistance limit EI180. Serial production.

EAEU HS CODE 7019 90 002 9

COMPLIES WITH THE REQUIREMENTS OF THE Technical Regulations OF the Eurasian Economic Union
"On the requirements for fire safety and fire extinguishing equipment"
(EAEU TR 043/2017).

additional information
The applied document: Dated 02/25/2025 No. 04/2025 "Fire-fighting gates of the FireTechnics trademark of the FireTechnics-EI180 type, in a roll-up or folding ("accordion") design, with a cloth made of non-flammable materials, with or without a loophole door, with unilateral use of water irrigation (water consumption of at least 0.08 l/m2 per second). Description of technical solutions confirming compliance with the requirements of the EAEU TR 043/2017, justified by an analysis of the risk associated with the possibility of harm and (or) damage." The gates are designed to fill openings in fire barriers. Use in accordance with the installation and operating instructions.

EAEU No. BY/112 02.01.TR043 140.01 00142
Series BY No. 0067964
Valid from 11/28/2025 to 11/27/2030

Special fire-fighting gates, vertical, horizontal, automatic "FireTechnics" type VPSVGA. fire resistance limit E160.
TU 25.11.23-004-16123348-2022 "Fire-fighting special gates "FireTechnics". Technical specifications", Technical description "Special fire-fighting gates, vertical, horizontal, automatic "FireTechnics" type VPSVGA".
Serial production.
EAEU HS CODE 7308 90 590 0
COMPLIES WITH THE REQUIREMENTS OF the Technical Regulations of the Eurasian Economic Union "On requirements for fire safety and extinguishing equipment"
(EAEU TR 043/2017).

Permitted overall dimensions. mm (W x H): max. - 1070x2400: min. - 800x1680. The gates are designed, among other things, for fire-fighting filling of openings when rail and chain type conveyors pass through them. Use in accordance with the "Installation and Operating Instructions".
VALID FROM 09/11/2024 to 09/10/2029 INCLUSIVE

EAEU No. VU/112 02.01. TRO43 140.01 00078

Fire-fighting gates "FireTechnics" type FT-D EI60, steel, hinged, double-domed, blind or with integrated door and/or technological hatch, automatic
(with mechanical or electric drive), with a web of sandwich panels with filling
made of mineral wool slabs with a nominal density of 100 kg/m3 and lined with steel sheet with a nominal thickness of 0.5 mm, manufactured according to TU 25.11.23-002-16123348-2022
"FireTechnics fire protection gates are made of steel. Technical specifications", technical description FT-D-RU25 "Automatic fire-fighting swing gates FireTechnics
type FT-D EI60". Overall dimensions, mm (height×width): gate – max. – 8000×8000,
min. – 1000×1000; built-in door – max. – 2400×1200, min. – 1400×700; technological
the hatch is 200×200. The fire resistance limit is EI60.
Serial production.
EAEU HS CODE 7308 90 590 0
COMPLIES WITH THE REQUIREMENTS OF the Technical Regulations of the Eurasian Economic Union "On requirements for fire safety and extinguishing equipment"
(EAEU TR 043/2017).
ADDITIONAL INFORMATION
Applicable standard: GOST R 53307-2009 "Construction structures. Fire doors
and gates. Fire resistance test method".
The gates are designed to fill openings in fire barriers. Use
in accordance with the installation and operating instructions.
VALID FROM 11/20/2025 TO 11/19/2030 INCLUSIVE
EAEU No. BY/112 02.01. TR043 140.01 00137

Certificate for fire-resistant automatic roller gates (blinds) type FireTechnics-EI120 with electric drive, design and overall dimensions in accordance with Appendix No. 1 on one sheet (form No. 000000), produced according to technical specifications TU 25.11.23-101-16123348-2025 Fire gates, fire and smoke protection roller blinds "FireTechnics". Serial release.

(Automatic fire-fighting roller shutters of the FireTechnics-EI120 type with electric drive, with steel guides, steel thickness of at least 1.5 mm, total thickness of the web of at least 4 mm, consisting of 2 outer layers of fiberglass type TG-430 (LLC "ET- Composite", TU 13.20.465-001-92121388-2019 ) with a surface density of at least 430 g/m2, a thickness of each fabric layer of at least 0.6 mm, and an internal filling made of thermoactive material of the MT-24 brand (PC Thermograph LLC, TU 23.99.14-001-47366139-2021 ), without a loophole door, with overall dimensions: in width 1000 mm, in height 1000 mm, and in width from 2610 mm to 10000mm, in height from 2610 mm to 10000 mm.)

Technical Regulations of the Eurasian Economic Union  
"On the requirements for fire safety and extinguishing equipment" (EAEU TR 043/2017).

GOST R 53307-2009 "Construction structures. Fire doors and gates. Fire resistance test method" Fire resistance limit – EI 120. Storage conditions: Storage conditions: at a temperature of -25°C to +50°C and a relative humidity of 90%. The service life is 10 years. The certificate applies to mass-produced products manufactured since 05/17/2025.
Valid from 17.10.2025 to 16.10.2030
No. RU C-RU.NV88.V.00299/25

FireTechnic Fire Doors FT-S EI60 type, steel, sectional, blind or with a gate and/or a service hatch, automatic
(with electric drive), with a sandwich panel canvas with mineral wool boards filling with nominal density of at least 100 kg/m3 and facing with a steel sheet of nominal thickness of 0.5 mm, produced according to TU 25.11.23-002-16123348-2022
"FireTechnics" steel fire-resistant gates. Technical specifications, technical description FT-S-RU25 "Automatic FT-S EI60 fire-resistant sectional gates". Allowed dimensions, mm (h×w): Gate – max. – 12000×12000; min. – 500×500; Gate – max. – 2300×1200; min. – 1400×700; Process hatch – 200×200. Fire resistance limit EI60. Serial production. EAEU HS CODE 7308 90 590 0 COMPLIES WITH THE REQUIREMENTS OF THE TECHNICAL REGULATION OF THE EURASIAN ECONOMIC UNION "ON REQUIREMENTS FOR FIRE SAFETY AND FIRE-EXTINGUISHING MEANS"(TR EAEU 043/2017). CERTIFICATE OF CONFORMITY ISSUED BASED ON CERTIFICATION TEST PROTOCOLS NO. 0403-C, NO. 0404-C dated 18.02.2025 by the testing laboratory (center) Limited Liability Company SibMosTest, accreditation certificate No. RA.RU.21NS35; production state analysis report dated 30.07.2025 (product certification body of Limited Liability Company BelMosCertificate, accreditation certificate No. BY/112 140.01, expert auditor Andrey Anatolyevich Shtykh).
Certification scheme: 1c.
 ADDITIONAL INFORMATION Standard applied: GOST R 53307-2009 "Building structures. Fire-resistant doors and gates. Fire-resistance test method". The gates are designed for fire-resistant filling of openings. Application in accordance with the "Installation and Operation Instructions".
No. EAEU BY/112 02.01. TR043 140.01 00134
 VALIDITY PERIOD FROM 27.10.2025 TO 26.10.2030 INCLUSIVELY

Certificate MVA-SSD high-speed gate
Test (research) protocol No. 67130-PRG/25 dated 03/21/2025. Testing laboratory. LLC "Proress" accreditation certificate No. ROSS RU .32001.04IBF1.IL58 dated 2022-12-09

Registration number ROSS RU.32001.04IBF1.OSP28.72798
Valid from 03/24/2025 to 03/23/2028

Automatic gates "FireTechnics"p fire-fighting roller type Firerollgate
(FRG) EI60, manufactured according to TU 25.11 23-002-16123348-2022 "Fire-fighting gates
"FireTechnics" steel. Technical specifications". technical description
FRG-RU El60 "Automatic steel fire safety roller gates "FireTechnics"
type "Firerollgate" (NFRG) with mineral wool filling with a nominal density of at least
100 kg/m3 or bulging material (FRG). Fire resistance limit EI 60"
Permitted overall dimensions mm (WxDxH): max. - 12200x10800: min. - 1100x750. Fire resistance limit
EI60
Serial production.
EAEU HS CODE 7308 90 590 0
COMPLIES WITH THE REQUIREMENTS OF the Technical Regulations of the Eurasian Economic Union
"On Requirements for Fire Safety and Extinguishing Equipment" (EAEU TR
043/2017)
additional information
Applicable standard: GOST R 53307-2009 "Constructions and building fire doors and
gates. Fire resistance test method."
Gates are designed for fire-fighting filling of openings. Use in accordance with
the "Installation and Operating Instructions".
VALID FROM 02/19/2025 TO 02/18/2030 INCLUSIVE

Fire curtain "FireTechnics" model "FireTechnics-H EI60", (FS-H) type
accordion, automatic (with electric drive), with a cloth made of non-combustible materials, without
irrigation (fire resistance limit EI60), manufactured according to TU 25.11.23-003-16123348-2022 "
Fire-fighting, smoke- and gas-tight roller gates (curtains) "FireTechnics". Technical
conditions", technical description FS-R.U 10003 "Fire curtains of the brand
"FireTechnics" model "FireTechnics-H EI60", (FS-H) type accordion, automatic, with a cloth made of
non-combustible materials, without irrigation (fire resistance limit EI60)".
Serial production.
THE EAEU FOREIGN ECONOMIC ACTIVITY CODE TH 7019 90 002 9
COMPLIES WITH THE REQUIREMENTS OF THE Technical Regulations of the Eurasian Economic
Union "On requirements for fire Safety and Fire Extinguishing means"
(TREAES 043/2017).
THE CERTIFICATE OF CONFORMITY WAS ISSUED ON THE BASIS OF
act on the analysis of the state of production dated 04/14/2023 (expert auditor of the certification
body for products of the Limited Liability Company "Belmossertificate", certificate
of accreditation No. BY/112 140.01 dated 08/23/2022, Andrey Anatolyevich Shtykh);
Certificate test Protocol No. 0268-C dated 06.07.2023 of the Testing Laboratory
SibMosTest Limited Liability Company, certificate of accreditation
No. RA.RU.21HC35.
Certification scheme: 1c.
ADDITIONAL INFORMATION
Applied standard: GOST R 53307-2009 "Construction structures. Fire
doors and gates. Fire resistance test method".
The total nominal thickness of the web structure (including the air gap) is 300 mm.
Allowed dimensions, mm (width heights): max. 12000x50000.
VALID FROM 10.07.2023 TO 09.07.2028 INCLUSIVE

Fire-fighting gates "FireTechnics" (fire resistance limit EI120)
special, steel, vertical, automatic (with electric drive) type VPSVA,
produced by TU 25.11.23-004-16123348-2022 "Special fire-fighting gates
"FireTechnics". Technical conditions", technical description "
Special fire-fighting gates "FireTechnics"" dated 01.11.2022.
Serial production.
CODE TH OF THE EAEU FOREIGN ECONOMIC ACTIVITY 7308 90 590 0
COMPLIES WITH THE REQUIREMENTS of the Technical Regulations of the Eurasian Economic
Union "On requirements for fire safety and fire Extinguishing Means"
(TR EAEU 043/2017).
THE CERTIFICATE OF CONFORMITY WAS ISSUED ON THE BASIS OF
the act of analysis of the state of production dated 17.11.2022 (expert auditor of the certification
body of the products of the Limited Liability Company "Belmossertificate", certificate
of accreditation No. BY/112 140.01 dated 23.08.2022, Andrey Anatolyevich Shtykh);
Test report No. 0258-C dated 31.05.2023 of the Testing Laboratory of the
Limited Liability Company "SibMosTest", certificate of accreditation No. RA.RU.21HC35.
Certification scheme: 1c.
ADDITIONAL INFORMATION
Applied document: OTR 02/2022 "Special fire-fighting gates FireTechnics type
ITSVA. Description of technical solutions for the implementation of technical regulations of the EAEU 043/2017, 
reasonable analysis of risk of harm and/or damage" from 01.11.2022. 
The dimensions of the gate due to technical description. Gate protect 
openings size (widthxheight) to 5000*4500 mm. Gate is designed, including 
fire filling the apertures with the passage through them of conveyors and 
conveyor belts. 
Valid FROM 31.05.2023 to 30.05.2028 INCLUSIVE

FireTechnics smoke-proof curtains (fire resistance limit E60): automatic roll-up (with electric drive) without guides FireShield-N E60 (FS-N) models; stationary (screen) FireShield-E E60 (FS-E) models, manufactured according to TU 25.11.23-003-16123348- 2022 "Fire-fighting, smoke- and gas-tight rolled gates (curtains) "FireTechnics". Technical conditions", technical description FS-DZSh-RU10002 "Smoke-proof curtains (smoke-free) FireTechnics models FireShield-N E60 (FS-N) (fire resistance limit E60) automatic roll-up (with electric drive) without guides and stationary curtains FireTechnics models FireShield-E E60 (FS-E) fire resistance limit E60".
Serial production.

THE EAEU FOREIGN ECONOMIC ACTIVITY CODE TH 7019 90 002 9
COMPLIES WITH THE REQUIREMENTS of the Technical Regulations of the Eurasian Economic Union "On requirements for fire safety and fire Extinguishing Means" (TR EAEU 043/2017).

 THE CERTIFICATE OF CONFORMITY WAS ISSUED ON THE BASIS OF
the act on the analysis of the state of production from 04/14/2023;
Test reports No. 0251-C of 28.04.2023, No. 0252-C of 28.04.2023 of the Testing Laboratory of the Limited Liability Company "SibMosTest", certificate of accreditation No. RA.RU.21HC35.
Certification scheme: 1 sec.

 additional information
Applied standard: GOST R 53305-2009 "Smoke screens. Fire resistance test method", paragraphs 5.1-5.3, 7.1-7.4 for the FireShield-N E60 (FS-N) model, paragraphs 5.1- 5.3, 7.1-7.3 for the FireShield-E E60 (FS-E) model.
Permitted overall dimensions, mm (width height): FireShield-N E60 (FS-N) models — no more than 30000x12000; FireShield-E E60 (FS-E) models - no more than 50000x20000.
Storage and operation conditions in accordance with the Passport. The service life is 10 years.

 EEAES No. BY/112 02.01. TR043 140.01 00020
Series BY No. 0041870
VALID FROM 02.05.2023 TO 01.05 2028 INCLUSIVE

EAEU Certificate BY/112 02.01. TR043 140.01 00016 for fire-fighting gates "FireTechnics" type "FT-S" (fire resistance limit EI 90) steel, sectional, blind or with a gate and/or technological hatch, automatic
(with electric drive), with a web of sandwich panels filled with mineral wool plates
of nominal with a density of at least 100 kg/m3, plasterboard sheets of type A and facing
with a steel sheet 0.5 mm thick, manufactured according to TU 25.11.23-002-16123348-2022 "
Fire-fighting gates "FireTechnics" steel. Technical conditions", technical description
FT-S-RU20 "Automatic fire-fighting sectional doors FT-S EI60, E190".
Serial production.

CODE TH OF THE EAEU FOREIGN ECONOMIC ACTIVITY 7308 90 590 0
COMPLIES WITH THE REQUIREMENTS of the Technical Regulations of the Eurasian Economic
Union "On requirements for Fire Safety and Fire Extinguishing Means"
(TREAES 043/2017).

THE CERTIFICATE OF CONFORMITY WAS ISSUED ON THE BASIS OF
the act on the analysis of the state of production of 13.02.2023;
Test report No. 0244-C dated 03/27/2023 of the Testing Laboratory of the
Limited Liability Company "SibMosTest", certificate of accreditation No. RA.RU.21HC35.
Certification scheme: 1 sec.

additional information
Applied standard: GOST R 53307-2009 "Construction structures. Fire
doors and gates. Fire resistance test method".
The nominal thickness of the web is 60 mm. Allowed dimensions, mm (width heights): gates -
max. 6000x7000; gates - max. 2300x 1200, min. 1400x700; technological hatch - 200x200.
Storage and operation conditions in accordance with the Passport. The service life is 10 years.

EAEU No. BY/112 02.01. TR043 140.01 00016
Series BY No. 0041866
VALIDITY PERIOD FROM 28.03.2023 TO 27.03.2028 INCLUSIVE

EAEU Certificate BY/112 02.01. TR043 140.01 00015 for Control Units (components of fire control devices) of the N-AES series of models: N-AES (FATE.954786.014); N-AES-PP (FATE.954786.017); N-AES-T (FATE.954786.025); N-AES-T(L2) (FATE.954786.026); N-AES-T-PP (FATE.954786.028); N-AES-T-PP(L2) (FATE.954786.029); N-AES(GU) (FATE.954786.030) manufactured according to technical specifications 26.30.50-001-16123348-2021 "Control units of the N-AES series (components of fire control devices). Technical conditions". Serial production. - comply with the requirements of the Eurasian Economic Union TR EAEU 043/2017 "On requirements for fire safety and fire extinguishing means". additional information The applied document OTR 01/2021 products comply with the requirements of GOST R 53325-2012 "Fire fighting equipment. Technical means of fire automation. General technical requirements and test methods", sub-paragraphs 7.2.10; 7.4.1 (a, d, e), 7.4.4, 7.6.1.16, 7.7.1-7.7.4, 7.8, 7.8.10.3, 7.14.2. Conditions of use and storage in accordance with the technical data sheet for the product. The service life is 15 years. EAEU No. BY/112 02.01. TR043 140.01 00015 Series BY No. 0041865 Valid from 02/28/2023 to 02/27/2028

Certificate Rolled PPV FireTechnics type Firerollgate NFRG EI60 No. EAEU BY/112 02.01. TR043 140.01 00002 indicates that the products of LLC "Fire protection Systems" - 
Fire-fighting gates "FireTechnics" (fire resistance limit EI60) steel rolled, automatic, type "Firerollgate" (NFRG) with a web of steel panels, filled with mineral wool plates with a nominal density of at least 100 kg / m3, manufactured according to TU 25.11.23- 002-16123348-2022 "Fire-fighting gates "FireTechnics" steel. "Technical conditions", the technical description of GFRG-RU11-EI60 "Automatic steel fire-fighting roller gates "FireTechnics" type "Firerollgate" (NFRG) with mineral wool filler with a nominal density of at least 100 kg/m3 or swelling material (FRG). Fire resistance limit EI60" - comply with the requirements of the EAEU TR 043/2017 "On requirements for fire safety and fire extinguishing means".

additional information

GOST R 53307-2009 "Construction structures. Fire doors and gates. Fire resistance test method".
Permitted dimensions, mm (width height): min. -900x300; max. - 12000x10000, the total nominal thickness of the web is not less than 51.4 mm.
Storage and operation conditions in accordance with the Passport. The service life is 10 years from the date of manufacture.

 EAEU No. BY/112 02.01. TR043 140.01 00002
Series No. 0041852
Valid from 13.10.2022 to 12.10.2027

The certificate for Fire-resistant Curtains FireTechnics-EI60 No. EAEU BY/112 02.01.TR043 140.01 00001 dated 09/21/2022 indicates that the products of LLC "Fire-fighting systems" are fire-fighting gates "FireTechnics" (fire resistance limit EI60) rolled (curtains), blind (standard version), automatic (with electric drive), models "FireTechnics-EI60", produced by TU 25.11.23-003-16123348-2022 .
Fire-fighting demogaz-tight roller gates (curtains) "FireTechnics". Specifications, technical description SAT-RU10001 "Roller gates (curtains) "FireTechnics" fire-fighting models "FireTechnics EI60" standard (solid), automatic (electrically driven), made of outer layers based on fiberglass with a nominal surface density of at least 460 g/m2, and an inner layer based on a thermoactive material, with steel guides.
 - comply with the requirements of the EAEU TR 043/2017 "On requirements for fire safety and fire extinguishing means".

additional information

GOST R 53307-2009 "Construction structures. Fire doors and gates. Fire resistance test method". Allowed dimensions, mm (width x height):
Min.-800x100 mm;
Max.-12000x12000 mm.

Storage and operation conditions in accordance with the Passport. The service life is 10 years.


 EAEU No. BY/112 02.01.TR043 140.01 00001
Series BY No. 0041851
Valid from 30.09.2022 to 29.09.2027

The certificate for Fire-resistant Curtains FireTechnics-EI30 of the EAEU BY/11202.01. TR043 140.01 00005 dated 08.12.2022 indicates that the products of LLC "Fire-fighting systems" - Roller gates (curtains) "FireTechnics" fire-fighting (fire resistance limit EI30) models FireTechnics-EI30 are deaf (standard version), automatic (with electric drive), manufactured according to TU 25.11.23-003-11623348-2022 "Fire- and smoke-proof gates and curtains FireTechnics. Technical conditions", technical description SAT-RU10002. Serial production.
 - comply with the requirements of the Eurasian Economic Union TR EAEU 043/2017 "On requirements for fire safety and fire extinguishing means".

additional information

GOST R 53307-2009 "Construction structures. Fire doors and gates. Fire resistance test method". Allowed dimensions, mm (width*height): no more than 10000x10000. Service life - 10 years from the date of manufacture


 EAEU No. BY/11202.01. TR043 140.01 00005
Series BY No. 0041855
Valid from 08.12.2022 to 07.12.2027

EAEU Certificate BY/112 02.01. TR043 022.01 00158 for fire-fighting gates (curtains) FireTechnics smoke- and gas-tight FireTechnics-EIS60 models of standard design (solid), automatic (electrically driven), made of outer layers based on fiberglass with a surface density of at least 440 g/m2, and an inner layer based on thermoactive material, with steel guides, manufactured according to the specifications of TU 5284-001-16123348-2020 "Fire- and smoke-proof FireTechnics gates and curtains. Technical conditions", technical description FS-S-RU10001. Serial production.
 - comply with the requirements of the Eurasian Economic Union TR EAEU 043/2017 "On requirements for fire safety and fire extinguishing means".

additional information

GOST R 53307-2009 "Construction structures. Fire doors and gates. Fire resistance test method".
The fire resistance limit is EIS60.
Allowed dimensions, mm (width*height): no more than 15000x15000. Service life - 10.
Conditions of use, storage and transportation in accordance with the Technical Description FS-S-RU10001 "FireTechnics fire-proof gates (curtains) smoke- and gas-tight FireTechnics-EIS60 models of standard design (solid), automatic (electrically driven), made of outer layers based on fiberglass with a surface density of at least 440 g/m2, and an inner layer based on thermoactive material, with steel guides. Fire resistance limit EIS60 without irrigation."


 EAEU No. BY/112 02.01. TR043 022.01 00158
Series BY No. 0033150
Valid from 12/29/2022 to 12/19/2027

The certificate according to the new technical regulation No. EAEU BY/112 02.01. TR043 022.01 00159 dated 12/20/2022 indicates that LLC "Fire-fighting Systems" has the right to produce "FireTechnics fire-fighting gates (fire resistance limit EI90), steel, sliding, blind, including with a gate and/or technological hatch, automatic (with electromagnet or electric drive) models:
single-field FireTechnics-P;
bipolar (sliding telescopic) FireTechnics-P2;
double-floor (sliding) FireTechnics-R;
multipole (sliding telescopic three-section ) FireTechnics-P3.

Manufactured according to TU 5284-001-16123348-2020 "Fire-proof FireTechnics gates and curtains. Technical conditions", technical description MMR-5023.
Serial production.

Additional information:
GOST R 53307-2009 "Construction structures. Fire doors and gates. Fire resistance test method".
The fire resistance limit is EI90. Allowed dimensions, mm (width height):
gates- max. 10000x6000;
gate - max. 1000x2200, min. 800x2000;
the technological hatch is 200x200.
The service life is 10 years.
Conditions of transportation, storage and operation in accordance with the technical description MMR-5023 and the product passport.

EAEU No. BY/112 02.01. TR043 022.01 00159
Series BY No. 0033151
Valid from 20.12.2022 to 19.12.2027

Certificate for Fire-Retardant Curtains FireTechnics-EI120 EAEU BY/11202/01/ TR043 022.01 00162 dated 12/17/2021 indicates that the products of LLC "Fire-fighting systems" - Roller gates (curtains) "FireTechnics" fire-fighting (fire resistance limit EI120) models FireTechnics-EI120 are deaf (standard version), automatic (with electric drive), manufactured according to TU 5284-001-16123348-2020 "FireTechnics fire-proof gates and curtains. Technical conditions", technical description FS-RU11-EI120. Serial production.
- comply with the requirements of the Eurasian Economic Union TR EAEU 043/2017 "On requirements for fire safety and fire extinguishing means".

additional information

GOST R 53307-2009 "Construction structures. Fire doors and gates. Fire resistance test method". Allowed dimensions, mm (width*height): no more than 10000x10000. Service life - 10 years from the date of manufacture


EAEU No. BY/11202/01/ TR043 022.01 00162
Series BY No. 0033154
Valid from 22/12/2022 to 16/12/2026

Certificate of conformity for roller gates AL-120, M-80, M-80P, which comply with the requirements of normative documents GOST 31174-20170 Metal gates. General technical conditions. Serial production.
The certificate was issued on the basis of test report No. 46356-PRG/24 dated 04/11/2024, issued by the testing laboratory of Progress LLC, certificate of accreditation registration No. ROSS RU.32001.04IBF1YUIL58 from 2022-12-09.

The certificate according to the technical regulation 043/2017 No. of the EAEU BY/112 02.01.TR043 022.01 00161 dated 22.12.2022 indicates that the products of LLC "Fire-fighting systems" are fire-fighting curtains (fire resistance limit EI180) models FireTechnics-EI180, rolled and folding (accordion type), standard design, (solid) or with a loophole door, automatic (electrically driven), manufactured according to TU 5284-001-16123348-2020 "Fire-proof gates and curtains FireTechnics. Technical Conditions" - comply with the requirements of the EAEU TR 043/2017 "On requirements for fire safety and fire Extinguishing Means.

Additional information:
GOST R 53307-2009 "Construction structures. Fire doors and gates. Fire resistance test method".
The fire resistance limit is provided by water cooling from the side opposite to the fire effect, slit sprinklers for curtains with a flow rate of (0.08 * h) l / m * s per linear meter in width, where h is the height of the curtain in meters.
Conditions of transportation, storage and operation in accordance with the technical description FS-RU10001 and the product passport. The service life is 10 years.

EAEU No. BY/112 02.01.TR043 022.01 00161
Series BY No. 0033153
Valid from 22.12.2022 to 02.03.2026